Проектор Christie Mirage WU-L

• 600 lumens ANSI ±10% (rated at 75-80% EBU depending on the lens) 
• 10,000:1 dynamic, 1,400:1 FOFO, 450:1 ANSI.
• 95% brightness and colour uniformity after electronic adjustment

• Revolutionary solid state projector using a single TI Darkchip 3™ DMD with a solid state illumination engine (no colour wheel) and sealed optics 
•  Native 1920 x 1200 (16:10 aspect ratio) WUXGA

• signals: Up to 1920 x 1200 WUXGA (Native 1920 x 1200 recommended)
• pixel clock: 330MHz max input
• scan rates: Horizontal: 15-150KHz • Vertical: 23.97-120Hz

• RS232 in/out
• RS422 in
• Ethernet (10/100)
• USB device
• GPIO (RS232 9-pin male connector)
• Dual 7 segment status display
• Remote control (with optional wired XLR connection)
• Slot 1-2 standard (populated):  two Dual link DVI-D (330MHz) input cards.  Each has a VGA (165MHz) port
• Slots 3-4 unpopulated
• Full bandwidth Analog BNC
• Dual Link DVI input card (330MHz), VGA (165MHz)
• Dual SD/HD-SDI
• Video Decoder*
• Twin HDMI
• Two standard Dual Link DVI input cards (330MHz) 

*The Dual link DVI input card has a 330MHz DVI-I connector which can support a single or dual-link DVI, analogue and HDCP video signals with proper cables.  There is also an additional 15-pin VGA connector for signals under 165MHz.  Only one input is active on this card at a time.  Two of these cards come standard on the Christie Mirage WU-L

• Mechanical, horizontal and vertical lens shift
• No shutter required
• No iris required – user programmable illumination parameters (eliminates the need for a mechanical shutter) 

Illumination

• Full spectrum LED (RGB)
• Illumination package has a MTBF of 60,000 hrs
• Light module can be changed in 15 minutes and is colour and bright level matching in real-time to the projector array 

Christie ArrayLOC™ 

• Manages the brightness and colour levels of all projectors within an array to a common level, in real-time with no additional latency

• 0.64:1 WUXGA lens
• 0.75:1 WUXGA lens

Zoom

• 1.2-1.6:1 WUXGA lens

Offsets

• 0.64:1 lens features ±5% (horizontal) and ±5% (vertical) offset when mounted in landscape orientation
• 0.75:1 lens features ±80% (horizontal) and ±100% (vertical) offset when mounted in landscape orientation
• 1.2-1.6:1 lens features ±80% (horizontal) and ±100% (vertical) offset when mounted in landscape orientation

*Each offset is specified with the other at zero. Simultaneous horizontal and vertical offsets may limit the adjustment range of each.

• User manual
• IR remote with hard wired cord
• Line cord
• Two Dual Link DVI-D Cards
• 3D sync cable

• Analog RGBHV BNC input card for Analog sources greater than 165MHz
• Dual link DVI input card*
• Dual HD-SDI input card
• Twin HDMI input card
• User kit (includes manual, IR remote and hard wired cable for the remote)
• Rugged Motion Platform user kit (purpose-built)  available

• Minimum Processing Latency (MPL™)
• Christie Twist™ II – advanced warping/edge-blending hardware technology integrated directly into the projector, includes warping/blending software
• Auto setup, power up
• Menus in 8 languages Multiple channel memories (for recall memory storage)
• Christie ArrayLOC™ – automatic, continuous management of brightness and colour space levels of all projectors in an array to a common level, in real-time

• operating voltage: 100-240V AC 50/60Hz
• operating current: 5.3A
• dissipation: 1364 BTU/hr (variable, dependent on content)

• Projector head module + light module (no lens): 8.7 x 18.4 x 11.0" (220 x 467 x 287mm)
• Electronics module: 16.5 x 5.5 x 6.7" (420 x 140 x 170mm)

Weight

• Projector head module + light module (no lens): 32lb (14.6kg) 
•  Electronics module: 9.7lbs (4.4kg)

Shipping weight:

• 52lb (23.6kg)

• Noise: 38dBA at 25°C ambient temperature (without electronics module)
• Operating temperature: 40-95ºF (5-35ºC)
• Humidity: 20-80% non-condensing

• Directives (EC) 2002/95/EC (RoHS) 
• 2002/96/EC (WEEE) 
• Regulation (EC) No. 1907/2006 (REACH)
• CAN/CSA C22.2 No. 60950-1 
• UL 60950-1 
• IEC 60950-1 
• FCC, Part 15, Subpart B, Class A
• EN55022/CISPR22 Class A 
• EN55024 / CISPR24