Коммутатор Extreme Switching SLX 9240 BR-SLX-9240-32C-DC-R

Артикул: BR-SLX-9240-32C-DC-R

Официальный дилер

В наличии / под заказ
Скидка на товар: до 10%
3 587 021 руб. за 1 шт.
Опросный лист
Артикул BR-SLX-9240-32C-DC-R
Доставка: от 2 до 6 недель
Оплата: в рублях по курсу ЦБ на день оплаты по безналичному расчёту.
  • Характеристики

Extreme Networks SLX 9240-32C с блоком питания постоянного тока с охлаждением Back to Front (от стороны без портов к стороне с портами) 32x100GE/40GE. (1+1) резервируемые блоки питания and (4+1) резервируемый модуль охлаждения в комплекте.

Технические характеристики
Switch Specifications 
Form factor 1U
Switching bandwidth (data rate, full duplex) 3.2 Tbps
Forwarding capacity (data rate, full duplex) (L2) 2.4 Bpps, (L3) 600 Mpps line-rate performance
Dimensions and weight 44.0 cm; 173.2 in. (Width), 444.7 cm; 175 in. (Depth), 4.37cm; 1.72 in. (Height) 9.07 kg; 20 lb
100/40 GbE ports 32
Power supplies Two internal, redundant, field-replaceable, load-sharing AC or DC power supplies
Cooling fans Five field-replaceable fans
Dynamically shared packet buffer 24 MB
Connector Options 10 GbE SFP+ (via splitter cable)
40 GbE QSFP+
100 GbE QSFP-28
Out-of-band Ethernet management: 10/100/1000 Mbps RJ-45
Console management: RJ45 serial port and USB type-C port with serial communication device class support
Storage: USB port, standard-A plug
Power 
Power inlet (AC) C13
Input voltage 90 V to 264 V or 40.8 V to 60 V DC
Input line frequency 47 Hz to 63 Hz
Inrush current 25 A peak
Maximum current 12 A/AC, 14 A/DC
Typical power consumption 184 W
Two AC PSU, five fan trays, 10% traffic, low fan speed
Maximum power consumption 581W
Two AC PSU, six fan trays, 100% traffic, high fan speed
Power supply rated maximum (AC) 650 W
Switch power consumption DC PSU 563W; AC PSU 581 W
Environment 
Humidity 5% to 95% at 50°C
Altitude Up to 3,000 m safety; 60 m to 4,000 m operational
Shock (operational) 20 G, 11 ms, half-sine wave
Vibration (operational) 1 G sine, 0.4 gms random, 5 Hz to 500 Hz
Airflow 134 CFM (estimated with two PSU, six fan trays)
Acoustics (25°C) 52 dBA
MTBF (25°C) 327,539 hours
Software Specifications 
Maximum MAC addresses Up to 48,000
Maximum VLANs 4,096
Maximum routes (in hardware) Up to 40,000
Maximum ACLs 512
Maximum members in a standard LAG 16
Maximum per-port priority pause level 8
Maximum switches an mLAG can span 2
Maximum IPv4 unicast routes 48,000
Maximum IPv6 unicast routes 8,000
DCB priority flow control classes 4
Maximum jumbo frame size 10,000 bytes
QoS priority queues (per port) 8
Layer 2 Switching 
Conversational MAC Learning 
Virtual Link Aggregation Group (vLAG) spanning 
Layer 2 Access Control Lists (ACLs) 
Address Resolution Protocol (ARP) RFC 826 
Layer 2 Loop prevention in an overlay environment 
MLD Snooping 
IGMP v1/v2 Snooping 
MAC Learning and Aging 
Link Aggregation Control Protocol (LACP) IEEE 802.3ad/802.1AX 
Virtual Local Area Networks (VLANs) 
VLAN Encapsulation 802.1Q 
Per-VLAN Spanning Tree (PVST+/PVRST+) 
Rapid Spanning Tree Protocol (RSTP) 802.1w 
Multiple Spanning Tree Protocol (MSTP) 802.1s 
STP PortFast, BPDU Guard, BPDU Filter 
STP Root Guard 
Pause Frames 802.3x 
Static MAC Configuration 
Multi-Chassis Trunking (MCT) 
Layer 3 Routing 
Border Gateway Protocol (BGP4+) 
DHCP Helper 
Layer 3 ACLs 
IGMPv2 
OSPF v2/v3 
Static routes 
IPv4/v6 ACL 
Bidirectional Forwarding Detection (BFD) 
64-Way ECMP 
VRF Lite 
VRF-aware OSPF, BGP, VRRP, static routes 
VRRP v2 and v3 
IPv4/IPv6 dual stack 
ICMPv6 Route-Advertisement Guard 
Route Policies 
IPv6 ACL packet filtering 
BGP Additional-Path 
BGP-Allow AS 
BGP Generalized TTL Security Mechanism (GTSM) 
BGP Peer Auto Shutdown 
IPv6 routing 
OSPF Type-3 LSA Filter 
Wire-speed routing for IPv4 and IPv6 using any routing protocol 
BGP-EVPN Control Plane Signaling RFC 7432 
BGP-EVPN VXLAN Standard-based Overlay 
Multi-VRF 
IP Unnumbered Interface 
VRRP-E 
Automation and Programmability 
gRPC Streaming protocol and API 
REST API with YANG data model 
Python 
PyNOS libraries 
DHCP automatic provisioning 
NETCONF API 
High Availability 
BFD 
Quality of Service 
ACL-based QoS 
Two Lossless priority levels for QoS
Class of Service (CoS) IEEE 802.1p 
DSCP Trust 
DSCP to Traffic Class Mutation 
DSCP to CoS Mutation 
DSCP to DSCP Mutation 
Random Early Discard 
Per-port QoS configuration 
ACL-based Rate Limit 
Dual-rate, three-color token bucket 
ACL-based remarking of CoS/DSCP/Precedence 
ACL-based sFlow 
Scheduling: Strict Priority (SP), Deficit Weighted Round-Robin (DWRR) Random Early Discard 
Management and Monitoring 
Zero-Touch Provisioning (ZTP) 
IPv4/IPv6 management 
Industry-standard Command Line Interface (CLI) 
NETCONF API 
REST API with YANG data model 
SSH/SSHv2 
Link Layer Discovery Protocol (LLDP) IEEE 802.1AB 
MIB II RFC 1213 MIB 
Syslog (RASlog, AuditLog) 
Management VRF 
Switched Port Analyzer (SPAN) 
Telnet 
SNMP v1, v2C, v3 
sFlow version 5 
Out-of-band management 
RMON-1, RMON-2 
NTP 
Management Access Control Lists (ACLs) 
Role-Based Access Control (RBAC) 
Range CLI support 
Python 
DHCP Option 82 Insertion 
DHCP Relay 
Timestamping 
Security 
Port-based Network Access Control 802.1X 
RADIUS 
AAA
TACACS+ 
Secure Shell (SSHv2) 
TLS 1.1, 1.2 
HTTP/HTTPS 
BPDU Drop 
Lightweight Directory Access Protocol (LDAP) 
Secure Copy Protocol 
Control Plane Policing (CPP) 
LDAP/AD 
SFTP 
Port Security